Replacement Outer Foil and Inner Blade Set for Panasonic Shavers ES-CM20 ES-CM2A ES-CM21 ES-CM2B

Are you using the premium Panasonic pocket shaver series: ES-CM20, ES-CM2A, or ES-CM21? After a period of use, even though the motor is still powerful, do you feel the shave is no longer close, causes skin irritation, or takes more time?

It is time to replace your Outer Foil and Inner Blades to restore peak shaving performance just like the day you bought it!

1. REPLACEMENT ACCESSORY INFORMATION

• Compatible Models: Fully compatible with all models in Panasonic's 2-blade mini shaver series, including: ES-CM20, ES-CM2A, ES-CM21 (and ES-CM2B).
• Material: Specialized stainless steel, highly durable and completely safe for skin.

2. BENEFITS OF REGULAR REPLACEMENT

• 100% Sharpness Restored: The inner blades featuring 30-degree acute edges cut hair quickly and cleanly without pulling or tugging.
• Ultimate Skin Protection: Over time, outer foils can wear down, dent slightly, or develop sharp edges that irritate or scratch the skin. Replacing the foil restores a smooth protective layer that glides effortlessly over your face.
• Closer & Smoother Shave: The smart honeycomb foil design fits closely to facial contours, effectively capturing even short or coarse stubble.
• Extends Motor Lifespan: Dull blades force the motor to work harder. Replacing them with sharp blades ensures smooth operation, saves battery power, and extends machine longevity.
• Ensures Hygiene: Installing fresh components removes built-up bacteria and debris trapped deep within old blades.

3. WHEN SHOULD YOU REPLACE THEM?

According to Panasonic's recommendations:

• Outer Foil: Replace once every year (or immediately if you notice holes, cracks, or dents).
• Inner Blades: Replace once every 2 years (or when the shave feels dull and takes longer than usual).

4. EASY HOME REPLACEMENT GUIDE

You can easily replace the foil and blades at home in under 1 minute by following these steps:

Step 1: Replace the Outer Foil

1. Turn off the shaver.
2. Gently press the release buttons/latches on both sides of the old foil frame and pull the head off the shaver body.
3. Take the new foil frame, align it correctly, and press down gently until it clicks into place.

Step 2: Replace the Inner Blades

1. After removing the outer foil frame, you will see the inner blades mounted on the shaver shafts.
2. Pull each old blade straight up to remove it from its shaft.
3. Take the new blade and insert it straight onto the shaft, ensuring the notch aligns completely with the shaft fitting.
4. Reattach the outer foil frame to the shaver.

Pro Tip: After installation, turn on the shaver for about 5 seconds to check for smooth operation and proper fit before actual use.

CLEANING & MAINTENANCE TIPS TO EXTEND BLADE LIFE

1. Quick Clean After Every Shave

• Tap out debris: Remove the outer foil frame and tap the plastic frame gently against the rim of the sink or your palm to dislodge stubble. Note: Never tap the thin metal foil directly against a hard surface, as it can easily dent or deform.
• Use the cleaning brush correctly: Use the included brush. Use the short/stiff brush end to sweep away hair debris around the inner blades. Use the long/soft brush end to gently clean the inside of the foil frame. Do not scrub the outer surface of the metal foil with the brush.

2. Deep Clean with Water and Soap (1–2 Times a Week)

• Rinse under running water: Run warm or clean water directly over the foil and inner blades to wash away oils, sweat, and dead skin cells.
• Use mild soap: Apply a small amount of liquid hand soap or neutral soap onto the foil, turn the shaver on for 10–15 seconds to let the foaming action break down grime, then rinse thoroughly with water.

3. Drying and Periodic Oiling

• Air dry naturally: After rinsing, shake off excess water and place the parts in a dry, well-ventilated area. Do not use a hairdryer (high heat deforms plastic and foil) or rub forcefully with paper towels.
• Apply lubricating oil (Once a week): Apply 1 drop of specialized shaver oil (or sewing machine oil) onto each inner blade and the outer foil surface. Turn the shaver on for 5 seconds, switch it off, and wipe off excess oil with a soft cloth. This reduces friction, prevents metal corrosion, and ensures quieter motor operation.

4. Daily Habits for Blade Protection

• Apply gentle pressure: Gently press the shaver against your skin while shaving. Pressing too hard does not yield a closer shave and will wear out the metal foil faster, cause warping, and dull the inner blades due to excessive friction.
• Cap it immediately after use: Always put the protective cap on when not in use or when packing the shaver in a bag for travel to prevent physical impacts from puncturing the foil.
• Keep skin clean: Wash your face before shaving to remove dirt and fine grit, which are major culprits behind rapid blade wear.

OUR COMMITMENT

✅ Product is exactly as pictured and described.

✅ New item, thoroughly inspected before shipping.

✅ Dedicated support to answer all customer inquiries.

Professional Repair, Battery Replacement, and Parts Replacement Services for Personal Care Devices

Are you experiencing problems with your beloved shaver, electric toothbrush, hair clipper, or body groomer? Don't worry! We offer professional repair, battery replacement, and GENUINE parts replacement services at REASONABLE PRICES for all popular brands on the market.

Our services include:

• Shavers and Trimmers:

Blade replacement

Repair of power supply, motor, and control circuit issues

Battery replacement

Cleaning and maintenance

• Electric Toothbrushes:

Battery replacement

Repair of charging, vibration, and motor issues

Brush head replacement

• Hair Clippers:

Battery replacement

Repair of power supply, motor, and control circuit issues

Replacement of clipper accessories

• Epilators and Body Groomers:

Repair of power supply, motor, and tweezer issues

Battery replacement

Cleaning and maintenance

• Water Flossers:

Repair of power supply, water pump, and control circuit issues

Battery replacement (if applicable)

Cleaning and maintenance

Our commitments:

• Genuine replacement parts, ensuring quality.
• Experienced and skilled technicians.
• Simple and fast repair process.
• Competitive and transparent pricing.
• Reliable warranty after repair.

Payment Methods:

We offer various convenient payment options for your purchases:

1. Cash: Pay directly at our store.
2. Bank Transfer: Transfer funds directly to our bank account. Please contact us for account details.
3. E-wallets: We accept popular Vietnamese e-wallets like MoMo and ZaloPay.
4. Paypal:  You can also pay securely using your Paypal account.